Fabricated Titanium Products - Trusted Supplier of Refractory Metals & Titanium Solutions https://luminatitan.com Mon, 24 Nov 2025 05:15:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://luminatitan.com/wp-content/uploads/2025/08/cropped-4974715d80f0113f2a68bbc35222d7e7-1754214443-32x32.jpg Fabricated Titanium Products - Trusted Supplier of Refractory Metals & Titanium Solutions https://luminatitan.com 32 32 Titanium Wire https://luminatitan.com/product/titanium-wire/ Sun, 20 Jul 2025 12:52:58 +0000 https://luminatitan.com/?post_type=product&p=6452 Key Advantages
  • Lightweight strength: high strength‑to‑weight ratio helps reduce mass while maintaining durability.
  • Corrosion resistance: excellent performance in chlorides and seawater; note, titanium is not resistant to HF (hydrofluoric acid).
  • Clean, consistent surfaces: bright‑drawn or pickled finishes support repeatable forming and welding.
  • Tight diameter control: fine tolerances and roundness for stable winding and downstream machining.
  • Flexible supply: small diameters from 0.10 mm for instruments up to 6.0 mm for structural uses; small‑batch prototyping available.

Primary Applications

  • Medical devices: frames, springs, orthodontic components and implantable hardware (use Gr23/Gr5 per application).
  • Aerospace & mobility: fasteners, safety wire, sensor brackets and lightweight structural elements.
  • Industrial & chemical: tying, stitching and conductive elements in corrosive environments; electronics and research fixtures.

Testing & Inspection

  • Dimensional checks: diameter, ovality and straightness/coil uniformity.
  • Mechanical testing: tensile and elongation by heat and size as specified.
  • Surface inspection: visual and microcleanliness; inclusion/defect screening.
  • Non‑destructive testing: eddy‑current for continuity and surface/subsurface defects (size‑dependent).
  • Chemical analysis: composition verification per grade and standard.

Forming, Welding & Handling Notes

Cold‑drawn wire offers higher strength; annealed wire provides better ductility for coiling, bending and spring‑forming. When welding, use GTAW with proper inert shielding to avoid oxygen pickup and discoloration. Keep tooling and contact surfaces clean and free of iron or copper residues to prevent contamination.

The post Titanium Wire first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> LuminaTitan supplies precision titanium wire manufactured to ASTM B863 for industrial, medical and aerospace use. With high strength‑to‑weight ratio, excellent corrosion resistance and biocompatible options, our wire is suitable for components requiring reliable forming, welding and long‑term stability. Production emphasizes chemistry control, surface cleanliness and dimensional consistency across spools and cut lengths.

Supply forms include coils on plastic/metal spools, straight cut lengths, and small prototype lots. Mill Test Certificates (MTC, EN 10204 3.1) and inspection reports are available on request to support supplier qualification and audits.

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B863 (titanium and titanium‑alloy wire); ASTM F67 (CP grades for medical); ASTM F136 (Ti‑6Al‑4V ELI for medical) Covers industrial and medical applications with recognized specs.
Grades Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr12, Gr23 Choose balance of strength, formability and corrosion resistance; Gr23 for implant use, Gr5/Gr9 for higher strength.
Diameter 0.10 – 6.00 mm (others on request) From micro‑instrument wire to structural diameters.
Supply Form Coils/spools, random or cut lengths; straightened wire available Supports automated winding and assembly.
Condition Cold‑drawn or annealed; stress‑relieved/straightened as ordered Select ductility for forming or higher strength for service.
Surface Bright‑drawn, pickled, polished; degreased for clean welding Consistent finish improves downstream yield and weldability.
Tolerances Tight diameter/roundness per order; typical ±0.005 – ±0.03 mm depending on size Stable process and interchangeability on automated lines.
Certificates MTC EN 10204 3.1; chemical & mechanical reports; RoHS/REACH statements on request Supports audits and regulatory documentation.

Typical Mechanical Properties (Annealed, indicative)

Values vary by grade and diameter; test per your specification.

Grade Tensile Strength (min, MPa) Yield Strength (min, MPa) Elongation (min, %)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10
Gr7 345 275 20
Gr9 620 438 15
Gr12 438 345 18
Gr23 860 795 10

Chemical Composition (Maximum Weight %)

Grade N C H Fe O Al V Pd Mo Ni Ti
Gr1 0.03 0.08 0.015 0.20 0.18 — — — — — bal
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — — bal
Gr3 0.05 0.08 0.015 0.30 0.35 — — — — — bal
Gr4 0.05 0.08 0.015 0.40 0.40 — — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — — bal
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — — bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5–3.5 2.0–3.0 — — — bal
Gr12 0.03 0.08 0.015 0.30 0.25 — — — 0.2–0.4 0.6–0.9 bal
Gr23 0.03 0.08 0.012 0.25 0.13 5.5–6.5 3.5–4.5 — — — bal

Packaging & Delivery

  • Packaging: spools with protective wrap or straight‑length bundles in moisture barrier and export wooden cases.
  • Labeling: grade, diameter, condition, heat/batch number, coil weight/length, PO number.
  • Shipping: global courier or sea freight; lead times aligned to your production schedule.

Compliance & Storage

RoHS and REACH statements can be provided. Store dry and clean; avoid chloride contamination and contact with carbon steel. Use dedicated tooling to preserve surface cleanliness and weldability.

Ordering Checklist

  • Standard and grade (e.g., ASTM B863 Gr23).
  • Diameter and tolerance; coil or straight lengths; target coil weight/length.
  • Condition (annealed/cold‑drawn) and surface (bright/pickled/polished).
  • Certificates required (MTC 3.1, chemical/mechanical).
  • Any special NDT or cleanliness requirements.
  • For samples, MTCs and custom specifications, contact: sales@luminatitan.com

The post Titanium Wire first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Tubing https://luminatitan.com/product/titanium-tubing/ Sun, 20 Jul 2025 12:52:14 +0000 https://luminatitan.com/?post_type=product&p=6449 Key Advantages
  • Seamless or welded tubing for precision flow and structural use.
  • High strength-to-weight ratio and corrosion resistance in chloride and process media.
  • Tight OD/WT tolerances; straightness and ovality controlled for automated assembly.
  • Clean, pickled/polished surfaces; internal cleanliness for fluid systems.
  • Traceable production with in-house inspection and MTC EN 10204 3.1.

Primary Applications

  • Chemical processing: heat-exchangers, condensers, corrosive-media lines.
  • Aerospace: hydraulic and pneumatic lines, lightweight structures.
  • Medical/biotech: instrumentation housings, non-implant fluid circuits.
  • Marine: desalination, offshore process tubing.

Testing

  • Dimensional checks: OD, wall thickness, ovality, straightness, length.
  • NDT: ultrasonic/eddy-current (per size and spec).
  • Hydrostatic/air-under-water pressure testing (on request).
  • Chemistry verification (O, N, H, Fe, etc.).
  • Mechanical sampling (tensile/yield/elongation) per heat-size.

Packaging & Delivery

  • End-caps and internal protection; bundles in export plywood cases.
  • Labels: grade, OD x WT, length, condition, heat/lot, PO.
  • Global courier or sea freight; lead times aligned to your schedule.

The post Titanium Tubing first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium tubing for chemical systems, aerospace lines and high-reliability assemblies. LuminaTitan supplies seamless and welded tubing produced under controlled processes and verified in-house to deliver low mass, corrosion resistance and consistent mechanical behavior.

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B338 (tubes), ASTM B337 (pipes); AMS 4943/4944 (where applicable) Aligns with common buyer specs for procurement and QA.
Grades Gr1, Gr2, Gr3, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12, Gr23 (ELI) Balances corrosion resistance and strength across applications.
Forms Seamless / welded; straight lengths or coiled (small OD) Matches pressure/flow and routing needs.
Dimensions OD 3.0-114.3 mm; wall 0.2-6.0 mm; length up to 6 m (typical) Covers micro lines to structural tubes; long lengths reduce joints.
Condition Annealed (M), cold worked (CW), straightened Tune ductility, strength and forming behavior.
Surface Pickled, polished, bright-cleaned; internal debris controlled Supports clean assembly and low pressure loss.
Tolerances Per ASTM or tighter by agreement (OD/WT/straightness/ovality) Repeatable fit-up for automated lines.
Documentation MTC EN 10204 3.1; inspection/test reports; RoHS/REACH Supports audits and supplier approval.

Mechanical Properties (indicative, annealed)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10
Gr7 345 275 20
Gr9 620 438 15
Gr12 438 345 18

Chemical Composition (Max. wt%)

Grade N C H Fe O Al V Mo Ni Ti
Gr1 0.03 0.08 0.015 0.20 0.18 – – – – bal
Gr2 0.03 0.08 0.015 0.30 0.25 – – – – bal
Gr3 0.05 0.08 0.015 0.30 0.35 – – – – bal
Gr4 0.05 0.08 0.015 0.40 0.40 – – – – bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5-6.75 3.5-4.5 – – bal
Gr7 0.03 0.08 0.015 0.30 0.25 – – 0.12-0.25 – bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5-3.5 2.0-3.0 – – bal
Gr12 0.03 0.08 0.015 0.30 0.25 – – 0.2-0.4 0.6-0.9 bal

Ordering Checklist

  • Standard and form: ASTM B338 (tube) / B337 (pipe); seamless or welded.
  • Grade; OD x WT (mm); length; tolerance targets (OD/WT/ovality/straightness).
  • Condition (annealed/cold worked/straightened) and surface (pickled/polished).
  • Testing (NDT, hydro, mechanical sampling) and documentation (MTC 3.1).
  • Packaging (end-caps, case type) and label fields (heat/lot, PO, qty).

The post Titanium Tubing first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Strip https://luminatitan.com/product/titanium-strip/ Sun, 20 Jul 2025 12:51:04 +0000 https://luminatitan.com/?post_type=product&p=6446 Key Advantages
  • Precision slit strip in Grades Gr1–Gr5 with consistent thickness and flatness for automated processing.
  • High strength‑to‑weight and corrosion resistance for chemical, medical and aerospace environments.
  • Tight tolerances (thickness/width/camber) and clean edges to protect downstream tooling.
  • Multiple finishes (pickled, brushed, polished) for bonding, coating and clean assembly.
  • Full batch traceability; MTC EN 10204 3.1 and inspection reports available.

Primary Applications

  • Chemical processing: corrosion‑resistant liners, gaskets, bellows and heat‑exchanger strips.
  • Medical devices (non‑implant): shields, housings and precision springs with biocompatible surfaces.
  • Aerospace: lightweight shims, shields and brackets with low magnetic signature.

Testing (typical)

  • Dimensional checks: thickness/width tolerance, camber, flatness, edge quality.
  • NDT / surface: visual and eddy‑current (size‑dependent), roughness measurement.
  • Chemistry verification: O, N, H, Fe and alloying elements per grade.
  • Mechanical sampling: tensile, yield and elongation per standard.

Packaging & Delivery

  • Unit packs: moisture‑barrier wrap on coils or sheeted bundles → export plywood cases.
  • Labels: grade, size, finish, condition, heat/lot, net weight/length, PO.
  • Shipping: global courier or sea freight; lead times aligned with your schedule.

The post Titanium Strip first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium strips engineered for chemical, medical and aerospace applications. LuminaTitan supplies slit strip manufactured under controlled rolling and finishing, then verified in‑house to deliver a high strength‑to‑weight ratio, corrosion resistance and repeatable mechanical behavior for automated lines and precision assemblies.

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B265 (strip/sheet/plate), AMS 4911 (Ti sheet/strip), ASTM F67/F136 (CP/ELI where applicable) Aligns with widely used specifications for design and QA.
Grades Gr1, Gr2, Gr3, Gr4, Gr5 (Ti‑6Al‑4V), Gr7, Gr9, Gr23 (ELI) Balances corrosion resistance, strength and formability by use case.
Thickness Range 0.10 – 4.00 mm (others on request) From thin, flexible strip to robust structural shims.
Width Range 10 – 2500 mm (slit coil or sheeted) Fits your line width; reduces secondary rework.
Tolerances Thickness ±0.01–±0.05 mm typical; camber/flatness to drawing Reliable fit for automated stamping, bending and laser lines.
Condition Cold‑rolled, annealed or stress‑relieved Tune ductility/strength for forming or stiffness for service.
Surface Pickled, brushed, polished; low‑roughness options available Supports bonding/coating and reduces particulate risk.
Forms Slit coils, sheeted strip, blanks to drawing Straight‑to‑line supply saves setup time and scrap.
Documentation MTC EN 10204 3.1; dimensional and mechanical test reports Supports audits and vendor qualification.
Traceability Heat/lot IDs on labels; full batch records retained End‑to‑end traceability for quality control.

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Mo Ni Ti
Gr1 0.03 0.08 0.015 0.20 0.18 — — — — bal
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — bal
Gr4 0.05 0.08 0.015 0.40 0.40 — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — bal
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5–3.5 2.0–3.0 — — bal
Gr12 0.03 0.08 0.015 0.30 0.25 — — 0.2–0.4 0.6–0.9 bal

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10

Ordering Checklist

  • Standard and grade (e.g., ASTM B265, Gr2 / Gr5).
  • Thickness and width; tolerance/camber/flatness targets; coil ID/OD.
  • Condition (cold‑rolled/annealed) and surface (pickled/brushed/polished).
  • Supply form (slit coil / sheeted blanks) and lengths/coil weight.
  • Inspection and documents (MTC 3.1, dimensional & mechanical reports).
  • Any special notes (edge type, burr limits, cleanliness/packaging needs).

The post Titanium Strip first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Sheet https://luminatitan.com/product/titanium-sheet/ Sun, 20 Jul 2025 12:50:18 +0000 https://luminatitan.com/?post_type=product&p=6443 Key Advantages
  • Precision customization: grades (Gr1–Gr23), conditions (annealed / cold rolled), and surface finishes tailored to your drawings. Small lots and prototypes available.
  • Robust quality assurance: visual, ultrasonic, chemical, and mechanical inspections; controlled interstitials for dependable performance in harsh environments.
  • Industry‑grade performance: high corrosion resistance and thermal stability trusted in medical, aerospace, and chemical industries.

Primary Applications

  • Chemical processing: corrosion‑resistant sheets for tanks and liners—handles acidic and alkaline media (not resistant to hydrofluoric acid, HF).
  • Medical devices: biocompatible housings, sterilizable components, and precision covers for diagnostic equipment.
  • Aerospace: lightweight shielding and structural enclosures where strength‑to‑weight ratio matters.

Testing & Inspection

  • Visual inspection (surface finish and defects)
  • Ultrasonic flaw detection (internal integrity)
  • Chemical composition verification (elemental control)
  • Mechanical testing (tensile strength, ductility, elongation)

Packaging & Delivery

  • Packaging: anti‑scratch film and edge protectors; sheets packed in wooden/plywood crates for safe transport.
  • Shipping: global air/sea delivery with export documentation. Lead times aligned to your production schedule.

The post Titanium Sheet first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> LuminaTitan supplies premium titanium sheets engineered to ASTM B265 standards for medical, aerospace, and chemical applications. Tight rolling and annealing control deliver flatness, stable microstructure, and consistent mechanical behavior. These titanium sheets balance lightweight strength with excellent corrosion resistance, making them ideal for precision enclosures, instrument panels, and corrosion‑resistant liners.

Technical Specifications

Parameter Details Why It Works for You
Standard ASTM B265, AMS 4911, ASTM F67 Meets stringent global standards for critical applications.
Grade Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr23 Select purity, strength, and weldability to fit your design.
Thickness 0.3 mm – 40 mm Optimized for thin precision parts and structural sheets.
Width 10 mm – 2500 mm Custom dimensions minimize secondary processing and scrap.
Condition Cold rolled (Y), Hot rolled (R), Annealed (M) Delivers flatness and consistent mechanical properties.
Surface Pickled, Polished, Brushed Smooth, consistent finishing for high‑precision assembly.

Ordering Checklist

•  Standard & grade (ASTM/AMS; Gr1/Gr2/Gr5/Gr23 etc.)
• Size: thickness, width, length; tolerances and flatness
• Surface: pickled / polished / brushed; protective film if needed
• Inspection: UT, mechanical sampling, chemistry (if required)
• Documentation: MTC EN 10204 3.1; any extra test reports
• Packaging & labels; delivery terms

 

The post Titanium Sheet first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Rod https://luminatitan.com/product/titanium-rod/ Sun, 20 Jul 2025 12:49:32 +0000 https://luminatitan.com/?post_type=product&p=6440 Key Advantages

Precision Customization: Need specific diameters (3 – 600mm), shapes (hexagonal/square), or conditions?
We tailor titanium rods for your use—aerospace structural parts, medical implants, chemical processing components, etc. Small batches welcome for testing.
Quality Assurance: Undergo strict testing (corrosion, eddy current, mechanical, microstructure).
Low impurity levels (controlled element composition)—ensures reliability in harsh environments (corrosive media, high temps).
Industry-Critical Performance: High strength-to-weight ratio, corrosion resistance—supports aerospace, medical, and chemical industries.

Primary Applications

Aerospace: Structural components—high strength-to-weight ratio, low density.
Medical Implants: Biocompatible rods—support tissue integration, corrosion-resistant.
Chemical Processing: Corrosion-resistant parts—withstands acidic/alkaline media.

Testing

Corrosion test, Eddy Current test, Mechanical test, Microstructure test, Ultrasonic test.

Packaging & Delivery

Packaging: Custom solutions (protective coatings, wooden cases)—safeguards rods during transit.
Shipping: Global delivery via trusted couriers. Contact us for lead times—we align with your production schedule.

The post Titanium Rod first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> LuminaTitan provides high-performance Titanium Rods engineered to ASTM B348/F67/AMS 4928/F136 standards.
With excellent corrosion resistance, high strength-to-weight ratio, and customizable specifications,
they are ideal for aerospace, medical, and chemical industrial applications.

Technical Specifications

Parameter Details Why It Works for You
Size (Dia.) 3mm – 600mm Covers diverse industrial needs—from fine rods to thick structural bars.
Material Grade Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr23 Delivers consistent corrosion resistance and mechanical properties.
Standard ASTM B348, ASTM F67, AMS 4928, ASTM F136 Aligns with global industrial quality—ensures reliability in critical applications.
Surface Black, Pickling, Sand-blasting, Polished Suits aesthetic and functional needs (corrosion resistance, smoothness).
Condition Cold rolled (Y), Hot rolled (R), Annealed (M), Quenching (C) Offers flexibility in mechanical properties (ductility, strength).
Shape Square, Round, Hexagonal, etc. Adapts to unique system designs (hexagonal for bolts, round for shafts).

 

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Pa Mo Ti
Gr1 0.03 0.08 0.015 0.20 0.18 — — — — Remaining
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — Remaining
Gr3 0.05 0.08 0.015 0.30 0.35 — — — — Remaining
Gr4 0.05 0.08 0.015 0.40 0.40 — — — — Remaining
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — Remaining
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — Remaining
Gr9 0.03 0.08 0.015 0.25 0.15 2.5–3.5 2.0–3.0 — — Remaining
Gr12 0.03 0.08 0.015 0.30 0.25 — — 0.2–0.4 0.6–0.9 Remaining

Mechanical Properties (Annealed State)

Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10
Gr7 345 275 20
Gr9 620 438 15
Gr12 438 345 18

Get Samples & Technical Support

To request samples, material test certificates (MTCs), or advice on selecting the right grade and finish for your application,
email sales@luminatitan.com or click “Request a Quote”. Our technical team will respond with sample availability,
lead times, and documentation support. Partner with LuminaTitan for consistent quality, responsive service,
and tailored titanium rod solutions for your aerospace, medical, or industrial projects.

The post Titanium Rod first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Powder https://luminatitan.com/product/titanium-powder/ Sun, 20 Jul 2025 12:48:15 +0000 https://luminatitan.com/?post_type=product&p=6437 Titanium Powder for Additive & Industrial Applications

Key Advantages

  • High purity, controlled interstitials (O/N/H) for stable mechanical properties.

  • Particle size distributions tailored for AM (e.g., 15–45 µm / 20–63 µm) or HIP/sintering.

  • Flowability and apparent density optimized for consistent layer spreading.

  • Batch traceability; MTC EN 10204 3.1 and test reports available.

Primary Applications

  • Additive manufacturing (LPBF/EBM/DMLS)

  • Thermal spraying & coatings

  • Sintered/HIP near-net shapes

  • Chemical catalysts / reactive media

Testing (typical)

  • Chemistry (ICP/OES), interstitials (O/N/H), PSD (laser diffraction)

  • Flow (Hall/Carney), apparent/tap density, morphology (SEM)

  • Sphericity, porosity and satellite content (AM grades)

Packaging & Delivery

  • Inert-gas filled foil bags inside sealed cans; export plywood cases

  • Labels: alloy/grade, PSD, lot/heat, weight, COA/MTC refs

  • Global courier or freight; lead times aligned with your schedule

Technical Specifications

  • Grades: Ti (Gr1/Gr2), Ti-6Al-4V (Gr5/Gr23)

  • PSD: e.g., 15–45 µm, 20–63 µm (custom on request)

  • Morphology: gas-atomized spherical (AM); irregular (sintering)

  • Interstitials: O/N/H controlled per grade/application

  • Standards: ASTM F2924 / F3001 (AM reference), internal QC/ISO 9001

The post Titanium Powder first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> LuminaTitan provides high-purity Titanium Powder engineered for additive manufacturing,
powder metallurgy, and biomedical use. With excellent flowability, low impurity content,
and precise particle size control, our powders ensure stable performance and consistent quality
for advanced production systems.

Technical Specifications

Parameter Details Why It Works for You
Purity ≥99.5% Ensures corrosion resistance and mechanical strength.
Morphology Spherical / Irregular / Sponge Adaptable to AM, PM, or coating processes.
Size Range 15–150 μm (customized) Optimized for diverse applications.
Oxygen Content ≤0.15% Maintains ductility and weldability.
Standard ASTM B348/B265, ISO 9001 Internationally recognized compliance.
Applications 3D printing, HIP, coating, biomedical Suitable for multiple industries.

Ordering Checklist

  • Grade / alloy and PSD target; AM process (LPBF/EBM/DMLS) or sintering

  • Flowability/density targets; morphology (spherical/irregular)

  • Chemistry/interstitial limits; required certificates (MTC 3.1, COA)

  • Packaging size, inert fill, handling/storage notes

The post Titanium Powder first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Plate https://luminatitan.com/product/titanium-plate/ Sun, 20 Jul 2025 12:47:23 +0000 https://luminatitan.com/?post_type=product&p=6434 Key Advantages
  • Precision customization across grades (Gr1–Gr5/Gr7/Gr9/Gr23), tempers and surface finishes.
  • Consistent low interstitial content for stable mechanical properties and corrosion resistance.
  • Tight thickness/flatness and clean surfaces for reliable downstream forming and joining.
  • Flexible supply: full sheets, CNC-cut blanks, prototype lots and fast sampling.

Primary Applications

  • Chemical processing: corrosion-resistant tanks/liners and process covers.
  • Medical devices: biocompatible housings, brackets and precision components.
  • Aerospace: lightweight thermal shields and structural skins.

Testing (typical)

  • Visual & dimensional checks (thickness, flatness).
  • Ultrasonic flaw detection; surface roughness inspection.
  • Chemical composition per spec; mechanical sampling (tensile/yield/elongation).

Packaging & Delivery

  • VCI/interleaf + export plywood cases; edge protection.
  • Labels with grade, size, condition, heat/lot and PO.
  • Global courier/sea freight; lead times aligned to your schedule.

The post Titanium Plate first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium sheets for chemical, medical and aerospace uses. Manufactured under controlled rolling/annealing with in-house inspection, our sheets provide high corrosion resistance, a strong strength-to-weight ratio and stable formability for precision fabrication.

Technical Specifications

Parameter Details Why It Works for You
Standard ASTM B265, AMS 4911, ASTM F67, ASTM F136 Globally recognized specs—easier qualification
Grade Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr23 Balance of corrosion resistance and strength
Thickness 0.3–40 mm From thin shields to structural sheets
Width 10–2500 mm Fits your design without extra secondary ops
Technology Hot Rolled / Cold Rolled / Machining Controls dimensions and mechanical behavior
Surface Pickling / Polished / Brushed Clean finish for bonding/coating and assembly

Ordering Checklist

  • Standard & grade (e.g., ASTM B265 Gr2/Gr5/Gr23).
  • Thickness × width × length; flatness/roughness targets.
  • Condition/surface (annealed, pickled/polished/brushed).
  • Tests/docs (MTC 3.1, UT, mechanical sampling, RoHS/REACH).
  • Packing/labels (unit pack, export case, label fields).

 

The post Titanium Plate first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Mesh https://luminatitan.com/product/titanium-mesh/ Sun, 20 Jul 2025 12:46:33 +0000 https://luminatitan.com/?post_type=product&p=6431 Key Advantages
  • Woven or expanded titanium mesh made from ASTM B863 wire or ASTM B265 sheet for precise filtration and shielding.
  • Excellent corrosion resistance; lightweight with high specific strength.
  • Tight aperture control (opening size, wire diameter/strand width, LWD/SWD) for repeatable flow and EMI/RFI performance.
  • Clean, oxide-controlled surfaces (pickled/bright) support bonding, coating and welding preparation.
  • Flexible supply: full sheets, cut-to-size panels, coils/rolls; batch traceability with MTC 3.1 on request.

Primary Applications

  • Chemical & Marine: filters, demisters, corrosion-exposed enclosures (not for hydrofluoric acid, HF).
  • Aerospace & Electronics: lightweight shielding, EMI/RFI enclosures, honeycomb/lamination skins.
  • Medical & Laboratory (non-implant): racks, housings, fixtures requiring biocompatibility.
  • Architectural & Industrial: screens, guards and ventilation panels in corrosive environments.

Testing

  • Aperture and wire/strand dimension checks (OD, LWD/SWD, thickness/flatness).
  • Tensile and bend tests by mesh type; adhesion/roughness for coating processes.
  • Visual/edge burr inspection; pickling quality and oxide level checks.
  • Chemistry verification of base material (O, N, H, Fe, etc.) as required.

Packaging & Delivery

  • Flat panels with corner protectors or coil rolls with moisture-barrier wrap → export plywood cases.
  • Labels: grade, mesh type (woven/expanded), aperture, size, lot/heat, PO.
  • Global courier/sea freight; lead times aligned with your production schedule.

The post Titanium Mesh first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium mesh for filtration, shielding and structural screening. Manufactured from ASTM B863 wire (woven) or ASTM B265 sheet (expanded) under controlled processes and verified in-house, our meshes combine corrosion resistance with tight aperture control for consistent flow, strength and EMI/RFI attenuation across chemical, aerospace, electronics and laboratory environments.

Technical Specifications

Parameter Details Why It Works for You
Material / Grades Gr1, Gr2, Gr5, Gr7, Gr9, Gr23 Choose CP Ti for maximum corrosion resistance or alloyed grades for higher strength.
Forms Woven mesh (from ASTM B863 wire); Expanded mesh (from ASTM B265 sheet) Match process and performance (filtration vs. shielding/rigidity).
Aperture / Strand Woven: opening 0.05–5.0 mm; wire Ø 0.03–1.0 mm. Expanded: SWD 2–30 mm; LWD 3–60 mm; strand 0.5–3 mm Dial-in flow and mechanical behavior.
Sheet/Panel Size Up to 1200 × 2500 mm (others on request); coils/rolls available Fits most housings/enclosures; easy to fabricate.
Surface Pickled / bright / brushed; passivated optional Clean assembly, good bonding/coating base.
Tolerance Aperture ±3–5% typical; thickness/strand per drawing Consistent fit, predictable performance.
Documentation MTC EN 10204 3.1; inspection reports; RoHS/REACH Supports audits and supplier qualification.

Ordering Checklist

  • Mesh type: woven (ASTM B863 wire) or expanded (ASTM B265 sheet).
  • Grade and thickness/wire diameter; aperture (opening or SWD/LWD) & tolerance.
  • Panel size or coil/roll; surface finish.
  • Tests and documents (MTC 3.1, dimensional report, RoHS/REACH).
  • Packaging & label requirements.

The post Titanium Mesh first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Foil https://luminatitan.com/product/titanium-foil/ Sun, 20 Jul 2025 12:44:57 +0000 https://luminatitan.com/?post_type=product&p=6428 Key Advantages

- Ultra-thin gauges (0.01–1.00 mm) with tight thickness/flatness control for precision laminations and shielding.

- Clean, oxide-controlled surfaces: bright, matte, pickled or brushed for bonding, coating and welding prep.

- High strength-to-weight and corrosion resistance across Gr1/Gr2/Gr5/Gr7/Gr9/Gr23.

- Flexible supply: slit coils, pancake coils or cut sheets; small-batch prototyping available.

- Batch traceability with mill test certificate (MTC 3.1) and inspection reports on request.

Primary Applications

- Chemical processing: corrosion-resistant linings, seals, gaskets and bellows.

- Medical and laboratory: housings, brackets and R&D components (non-implant uses).

- Aerospace and electronics: lightweight shielding, EMI/RFI barriers and precision shims.

Testing

- Visual and surface roughness checks; edge and burr inspection.

- Thickness and flatness mapping; width and length tolerances.

- Chemical analysis (O, N, H, Fe etc. as required).

- Mechanical sampling: tensile/yield/elongation appropriate to gauge and grade.

Packaging & Delivery

- Coils: vacuum/moisture-barrier wrap with core protection; sheets: interleaved and film-wrapped.

- Export plywood cases with corner and edge guards.

- Labels include grade, temper/condition, thickness × width, lot/heat, coil weight/length, PO.

- Global courier or sea freight; lead times aligned with your build schedule.

The post Titanium Foil first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]>

Premium titanium foil engineered for chemical, medical-equipment and aerospace uses. Manufactured under controlled rolling and finishing, LuminaTitan foil offers clean surfaces, stable mechanical response and reliable corrosion resistance at very low gauges. Supply options include slit coils, pancake coils or cut-to-size sheets with full lot traceability.

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B265 (titanium strip/sheet/plate), ASTM F67 (CP Ti, optional) Aligns with widely used material frameworks.
Grades Gr1, Gr2, Gr3, Gr4, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr23 (ELI) Choose balance of formability, strength and corrosion resistance.
Thickness 0.01–1.00 mm (others on request) From ultra-thin laminations to robust shims.
Width 10–1,250 mm typical (slit to width) Fit your process without secondary trimming.
Condition Cold-rolled/annealed; stress-relieved as required Stable flatness and predictable forming.
Surface Bright, matte, pickled, brushed Supports bonding, coating and clean assembly.
Edges Slit, deburred or rounded Safer handling; improved winding and feeding.
Formats Coils/spools; pancake coils; cut sheets Flexible supply aligned to your line setup.
Tolerances Thickness ±0.005–±0.02 mm; width ±0.2–±0.5 mm (typical) Interchangeability and tight stack-up control.
Documentation MTC EN 10204 3.1; inspection reports; RoHS/REACH statements Supports audits and supplier qualification.

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10
Gr7 345 275 20
Gr9 620 438 15
Gr23 860 795 10

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Mo Ni Ti
Gr1 0.03 0.08 0.015 0.20 0.18 — — — — bal
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — bal
Gr4 0.05 0.08 0.015 0.40 0.40 — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — bal
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5–3.5 2.0–3.0 — — bal
Gr23 0.03 0.08 0.012 0.25 0.13 5.5–6.5 3.5–4.5 — — bal

Ordering Checklist

– Standard (ASTM B265) and grade (e.g., Gr2 / Gr5 / Gr23).

– Thickness × width, tolerances, flatness and edge type.

– Condition (cold-rolled/annealed), surface (bright/matte/pickled/brushed).

– Supply form (coil/pancake/sheets) and target coil weight/length.

– Certificates (MTC 3.1) and any special test requirements.

The post Titanium Foil first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Bar https://luminatitan.com/product/titanium-bar/ Sun, 20 Jul 2025 12:43:28 +0000 https://luminatitan.com/?post_type=product&p=6425 Key Advantages
  • Precision customization: diameter 3–600 mm, round/square/hex; tight dimensional tolerances for automated lines.
  • High strength‑to‑weight ratio and excellent corrosion resistance across grades (Gr1–Gr5/Gr7/Gr12/Gr23).
  • Process control & documentation: batch traceability with MTC EN 10204 3.1 and inspection reports.
  • Flexible supply: cut‑to‑length, random lengths or bars to drawing; small‑batch sampling available.

Primary Applications

  • Aerospace: fasteners, frames, landing gear components where weight reduction is critical.
  • Medical: biocompatible bars for instruments, fixtures and implantable hardware (final device approvals by buyer).
  • Chemical processing: corrosion‑resistant shafts, valve stems and structural parts in acidic/alkaline media.

Testing (typical)

  • Ultrasonic flaw detection; eddy current checks (size‑dependent).
  • Mechanical tests: tensile, yield, elongation (per order/grade).
  • Chemical analysis per ASTM; low interstitial control (O, N, H).
  • Microstructure evaluation; grain size and alpha‑case control.

Packaging & Delivery

  • Packaging: plastic sleeves + corrosion‑inhibiting wrap; export plywood cases; ends protected.
  • Labeling: grade, diameter, condition, heat/lot, length/pcs, PO.
  • Shipping: global courier or sea freight; lead times aligned with your schedule.

The post Titanium Bar first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium bars engineered for aerospace, medical and chemical applications. Produced under tightly controlled processes and verified in-house, our round, square and hexagonal bars provide a high strength-to-weight ratio, dependable corrosion resistance and stable mechanical behavior across lots. Diameters 3–600 mm with annealed/hot-worked/cold-worked conditions and black/pickled/sand-blasted/polished finishes available; heat/lot traceability (MTC 3.1) and inspection reports on request.

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B348, ASTM F67, AMS 4928, ASTM F136, AMS 2631B Aligns with global quality benchmarks; simplifies qualification.
Grades Gr1, Gr2, Gr4, Gr5, Gr7, Gr12, Gr23 Balances corrosion resistance and strength across applications.
Diameter 3 – 600 mm (tighter ranges on request) Covers fine pins up to heavy structural bars.
Shapes Round, square, hexagonal (others on request) Supports bolts, shafts, fixtures and custom profiles.
Condition Annealed / Hot‑rolled / Cold‑worked / Quenched (codes: M/R/Y/C) Tune ductility vs. strength for machining and service loads.
Surface Black / Pickled / Sand‑blasted / Polished Choose finish for corrosion performance and fit/finish.
Supply Lengths Random or cut‑to‑length; ends faced/Chamfered on request Reduces downstream machining and waste.
Documentation MTC EN 10204 3.1; inspection reports; RoHS/REACH Supports audits and supplier qualification.

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Pa Mo Ni Ti
Gr1 0.03 0.08 0.015 0.20 0.18 — — — — — bal
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — — bal
Gr4 0.05 0.08 0.015 0.30 0.35 — — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — — bal
Gr7 0.08 0.08 0.015 0.30 0.25 — — — 0.12–0.25 — bal
Gr12 0.08 0.08 0.015 0.30 0.25 — — — 0.2–0.4 0.6–0.9 bal
Gr23 0.03 0.08 0.012 0.25 0.13 5.5–6.5 3.5–4.5 — — — bal

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr1 240 138 24
Gr2 345 275 20
Gr3 450 380 18
Gr4 550 483 15
Gr5 895 828 10
Gr7 345 275 20
Gr9 620 438 15
Gr12 438 345 18

Ordering Checklist

  • Standard & grade: e.g., ASTM B348; Gr1/Gr2/Gr5/Gr7/Gr12/Gr23.
  • Dimensions & tolerance: diameter, length, tolerance class; round/square/hex.
  • Condition/temper: annealed / cold‑worked / hot‑rolled; hardness or strength targets.
  • Surface/finish: pickled / polished / sand‑blasted / black; roughness target if any.
  • Testing & NDT: ultrasonic / eddy current; mechanical sampling; chemical analysis.
  • Documentation: MTC EN 10204 3.1; inspection reports; RoHS/REACH statements.
  • Quantity & packaging: lot size, cut‑to‑length, end‑protection, export cases.
  • Logistics & terms: target lead time; Incoterms; destination & preferred carrier.
  • Drawings & notes: any machining/cutting, marking, or special certifications.

 

The post Titanium Bar first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]>