Machined Titanium Products - Trusted Supplier of Refractory Metals & Titanium Solutions https://luminatitan.com Thu, 09 Oct 2025 06:21:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://luminatitan.com/wp-content/uploads/2025/08/cropped-4974715d80f0113f2a68bbc35222d7e7-1754214443-32x32.jpg Machined Titanium Products - Trusted Supplier of Refractory Metals & Titanium Solutions https://luminatitan.com 32 32 Titanium Forging https://luminatitan.com/product/titanium-forging/ Sun, 20 Jul 2025 12:56:38 +0000 https://luminatitan.com/?post_type=product&p=6464 Key Advantages

  • Near‑net shapes (rings, discs, blocks, step shafts) reduce machining and waste.
  • Microstructure control (alpha‑beta balance, equiaxed/bi‑modal) for stable properties.
  • Heat treatment options: mill‑annealed (M), annealed; ST+A on request for selected grades.
  • Ultrasonic tested (typical to ASTM B594 or AMS‑STD‑2154 classes) for internal soundness.
  • Excellent corrosion resistance with lightweight performance; non‑magnetic.
  • Full heat/lot traceability; MTC EN 10204 3.1 and inspection reports available.

Primary Applications

  • Aerospace: discs, rings, brackets, actuators, structural nodes.
  • Chemical & marine: flanges, pump/valve bodies, heat‑exchanger covers.
  • Energy & industrial: compressor rings, seals, fixtures subject to corrosion.
  • Medical equipment (non‑implant): frames, housings, fixtures.

Testing

  • Dimensional inspection to drawing; surface finish checks.
  • Ultrasonic testing (UT) per ASTM B594 / AMS‑STD‑2154 class as specified.
  • Mechanical sampling: tensile, yield, elongation; hardness.
  • Microstructure/grain size (e.g., ASTM E112) and cleanliness (low interstitials).
  • Dye‑penetrant (PT) on request for surface discontinuities; chemistry verification.

Packaging & Delivery

  • Protective wrap with corrosion inhibitors; machined faces capped; export plywood cases.
  • Labels include grade, condition, dimensions, heat/lot, PO; photo records on request.
  • Global courier/sea freight; lead times aligned with your production schedule.

The post Titanium Forging first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium forgings for aerospace, chemical and high‑precision machinery. LuminaTitan supplies open‑die and ring‑rolled forgings manufactured under controlled thermo‑mechanical routes and verified in‑house to deliver reliable strength‑to‑weight, corrosion resistance and consistent mechanical behaviour. Near‑net shapes help reduce machining time and material waste while maintaining traceability and quality documentation (MTC 3.1).

Technical Specifications

Parameter Details Why It Works for You
Standards ASTM B381 (Ti/Ti‑alloy forgings); UT per ASTM B594 or AMS‑STD‑2154; MTC EN 10204 3.1 Clear qualification path and NDT coverage for critical parts.
Grades Gr2, Gr5 (Ti‑6Al‑4V), Gr7, Gr23 (ELI); others on request Balances corrosion resistance, strength and toughness requirements.
Shapes Rings, discs, blocks, step shafts, hubs; near‑net per drawing Minimises machining and buys back cycle time.
Size Range (typical) Rings OD 150–2,500 mm; discs Ø 100–1,200 mm; blocks up to 800×800×300 mm Covers common chemical and aerospace envelope sizes.
Heat Treatment Mill‑annealed / annealed; solution‑treated and aged (ST+A) on request Tune strength/ductility for the application.
Surface As‑forged, rough‑machined, or finish‑machined; pickled/passivated on request Corrosion protection and assembly‑ready finish options.
NDT UT class per order; optional PT for surface; documentation retained Confidence in internal soundness and surface integrity.
Documentation MTC 3.1, inspection reports, RoHS/REACH statements Supports audits and supplier qualification.

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Mo Ni Ti
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — bal
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — bal
Gr23 0.03 0.08 0.012 0.25 0.13 5.5–6.5 3.5–4.5 — — bal

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr2 345 275 20
Gr5 895 828 10
Gr23 860 795 10

Ordering Checklist

  • Standard & NDT: ASTM B381 forgings; UT class (ASTM B594 or AMS‑STD‑2154).
  • Grade (Gr2 / Gr5 / Gr7 / Gr23).
  • Shape & size: ring/disc/block/step shaft with all key dimensions and tolerances.
  • Heat treatment (annealed / mill‑annealed / ST+A if applicable).
  • Surface (as‑forged / rough‑machined / finish‑machined; pickled/passivated).
  • Inspection docs (MTC 3.1, UT reports, microstructure, hardness).
  • Packaging, labels and any export paperwork requirements.

The post Titanium Forging first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Flange https://luminatitan.com/product/titanium-flange/ Sun, 20 Jul 2025 12:55:43 +0000 https://luminatitan.com/?post_type=product&p=6461 Key Advantages
  • Corrosion-ready grades: Gr2 (CP), Gr7 (Pd-alloy, chlorine service), Gr12 (Ti-0.3Mo-0.8Ni, galvanic mitigation), Gr5 (high-strength, non-welded uses).
  • Standards coverage: ASME B16.5/B16.47, MSS SP-44, EN 1092-1, JIS B2220—easy interchange with existing pipework.
  • Tight sealing faces: stock/raised ring, RTJ, or tongue-and-groove; controlled Ra for reliable gasket seating.
  • Traceable quality: heat/lot tracking with MTC EN 10204 3.1; PMI/XRF on request.
  • Flexible supply: forged or machined from plate; custom drilling patterns, reducer/expanding designs, small-batch prototypes available.

Primary Applications

  • Chemical & desalination: chlorine/halide media, seawater service, scrubbers, heat-exchangers.
  • Oil & gas / offshore: lightweight, corrosion-resistant tie-ins and manifolds.
  • Power & nuclear balance-of-plant: low neutron absorption (CP grades), corrosion-critical piping.
  • Pharma & ultrapure systems: low contamination risk, clean surface finishes.

Testing (typical)

  • PMI / XRF for grade verification; dye-penetrant (PT) on sealing faces.
  • Dimensional check to ASME/EN/JIS drawings; bolt-hole pattern & thickness.
  • Surface roughness (e.g., Ra 3.2–6.3 μm for RF) with reports on request.
  • Hydrostatic / leak test when supplied as assembled spools (on request).
  • Documentation: MTC 3.1, RoHS/REACH statements.

Packaging & Delivery

  • Packaging: PE wrap + edge protectors; flange faces with plastic covers; export plywood cases.
  • Labeling: grade, standard, size/class, heat/lot, PO; gasket face type & Ra where applicable.
  • Shipping: global courier/sea freight; lead times aligned to your schedule.

The post Titanium Flange first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium flanges for corrosive and weight-sensitive piping systems. LuminaTitan forges and machines Gr2/Gr7/Gr12 (and selected Gr5) flanges to ASME/EN/JIS standards under controlled processes and in-house inspection. Parts are supplied with traceable heat/lot IDs and optional surface-finish certificates to ensure reliable sealing and long service life.

Technical Specifications

Parameter Details Why It Works for You
Standards ASME B16.5, ASME B16.47 (Series A/B), MSS SP-44; EN 1092-1; JIS B2220 Interchangeable with most global piping specs.
Sizes NPS ½″–24″ (B16.5), up to 48″ (B16.47); DN15–DN1200 Covers instrument to large-bore headers.
Pressure Class Class 150/300/600 (higher on request); PN 10–40 Matches common plant ratings.
Grades Gr2 (CP), Gr7 (Ti-Pd), Gr12 (Ti-Mo-Ni), Gr5 (Ti-6Al-4V)* Choose corrosion, galvanic resistance or strength as needed.
Forms Weld neck, slip-on, socket weld, blind, lap joint, threaded, RTJ Fits your joint design and maintenance strategy.
Facing RF/FF, RTJ, T&G; Ra control 3.2–6.3 μm typical Reliable gasket sealing and repeatable torque.
Manufacture Open-die/closed-die forging; CNC machining from plate where applicable Balance cost, lead time and geometry flexibility.
NDE & QC PMI/XRF, PT on faces, dimensional & runout, surface-finish report Verifies grade and sealing performance.
Docs MTC EN 10204 3.1; inspection reports; RoHS/REACH Simplifies audits and supplier qualification.

* Gr5 typically for non-welded or matched weld procedures; confirm weld compatibility with mating components.

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Pd Mo Ni Ti
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — — bal
Gr7 0.03 0.08 0.015 0.30 0.25 — — 0.12–0.25 — — bal
Gr12 0.03 0.08 0.015 0.30 0.25 — — — 0.2–0.4 0.6–0.9 bal

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr2 345 275 20
Gr5 895 828 10
Gr7 345 275 20
Gr12 438 345 18

Ordering Checklist

  • Standard & type: ASME B16.5/B16.47/EN 1092-1/JIS; WN/SO/SW/Blind/LJ/Threaded/RTJ.
  • Size & rating: NPS/DN, Class/PN; bolt-hole qty/Ø/PCD; facing (RF/FF/RTJ/T&G).
  • Grade: Gr2 / Gr7 / Gr12 / Gr5 (and weld compatibility).
  • Surface: gasket face Ra target; passivation/pickling.
  • NDE & docs: PMI, PT, dimensional report, MTC 3.1, RoHS/REACH.
  • Logistics: quantity, packaging, target lead time & carrier.
  • Drawings & notes: reducer/expanding specials, long necks, forging direction, etc.

 

The post Titanium Flange first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Fittings https://luminatitan.com/product/titanium-fittings/ Sun, 20 Jul 2025 12:55:00 +0000 https://luminatitan.com/?post_type=product&p=6458 Key Advantages

- Corrosion resistance in chloride and oxidising media; suitable for chemical and marine service (grade dependent).

- Clean weldability and low interstitials (per specification) support sanitary/medical assemblies.

- Tight dimensional tolerances for reliable fit-up on automated lines and orbital welding.

- Multiple end types (butt-weld, socket-weld, threaded) to match existing systems.

- Traceable batches; MTC EN 10204 3.1 available for audits and supplier qualification.

 

Primary Applications

- Chemical process lines and heat-exchanger manifolds.

- Medical/biotech fluid paths and clean-room utilities.

- Seawater service, desalination skids and chlorine-bearing environments (grade dependent).

- Aerospace ground support, test stands and lightweight corrosion-resistant pipework.

 

Testing

- Visual and dimensional checks (OD/ID, wall, ovality, squareness).

- NDT on request: dye-penetrant, ultrasonic; hydrostatic or pneumatic proof testing per drawing.

- Chemical composition verification; mechanical sampling (tensile/yield/elongation) by heat.

- Surface and cleanliness inspection for weld ends (Ra targets when specified).

Packaging & Delivery

- End-cap protection; desiccant/film wrap; export plywood cases.

- Each box labelled with grade, size, schedule/class, heat/lot and PO for traceability.

- Global courier or sea freight; lead times aligned with your production schedule.

The post Titanium Fittings first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium pipe fittings engineered for chemical, medical and industrial systems. LuminaTitan supplies elbows, tees, reducers, caps and couplings manufactured under controlled processes and verified in-house to deliver corrosion resistance, clean weldability and consistent mechanical behaviour.

Technical Specifications

Parameter Details / Why It Works
Standards (by type) Butt-weld: ASME B16.9 / MSS SP-43 (light-wall);
Socket-weld/Threaded: ASME B16.11;
Flare/Custom per drawing
Grades Gr2 (CP Ti), Gr7 (Ti-Pd for chlorine media), Gr12 (Ti-Mo-Ni for crevice corrosion), Gr5 (Ti-6Al-4V) on request
Sizes DN15 — DN300 (1/2″ — 12″); schedules per pipe spec
End Types BW (bevelled), SW, NPT/BSPT threaded; sanitary on request
Surface / Finish Bevelled/cleaned ends; pickled/polished; Ra targets per print
NDT / QA PMI/chem check; dye-penetrant; ultrasonic (as req.); MTC 3.1

 

 

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Mo Ni Ti
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — Rem.
Gr7 0.03 0.08 0.015 0.30 0.25 — — — 0.12–0.25 Rem.
Gr12 0.03 0.08 0.015 0.30 0.25 — — 0.2–0.4 0.6–0.9 Rem.
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — Rem.

 

 

Mechanical Properties (typical)

Grade UTS (MPa) YS (0.2%, MPa) Elongation (%)
Gr2 345 275 20
Gr7 345 275 20
Gr12 438 345 18
Gr5 (mill-annealed) 895 828 10

 

 

Ordering Checklist

– Type/standard (BW: ASME B16.9 / SP-43; SW/THD: ASME B16.11).

– Grade (Gr2/Gr7/Gr12/Gr5) and medium/temperature notes.

– Size (DN/NPS), schedule/class, end type (BW bevel, SW, NPT/BSPT).

– Surface/finish (pickled/polished) and Ra target if required.

– Tests/docs (MTC 3.1, PMI, NDT, hydro).

The post Titanium Fittings first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Titanium Bolts https://luminatitan.com/product/titanium-bolts/ Sun, 20 Jul 2025 12:53:57 +0000 https://luminatitan.com/?post_type=product&p=6455 Key Advantages
  • Precision fasteners in Gr2 / Gr5 (Ti-6Al-4V) / Gr23 (ELI) with excellent strength-to-weight and corrosion resistance.
  • Wide head & drive options: hex cap, socket cap (Allen), button, countersunk/flat, flange, studs; matching nuts/washers available.
  • Tight threads & tolerances (metric M/ISO or UNC/UNF) for automated assembly; GO/NO-GO gauged.
  • Passivated / polished surfaces; color anodizing for line identification (optional).
  • Process control & batch traceability; MTC EN 10204 3.1 and test reports on request.

Primary Applications

  • Aerospace: weight-saving structures, seat/galley hardware, UAV/space fixtures.
  • Medical equipment (non-implant): frames, housings, fixtures needing biocompatibility & corrosion resistance.
  • Chemical & marine: pumps, heat-exchanger flanges, corrosion-exposed assemblies.
  • High-tech machinery: semiconductor/lab tooling, non-magnetic fixtures.

Testing (typical)

  • Dimensional: thread GO/NO-GO, pitch diameter, concentricity, head geometry.
  • Mechanical sampling: tensile/yield, wedge tensile (where applicable), hardness.
  • NDT / surface: visual, eddy-current (size-dependent), roughness; salt-spray on request.
  • Chemistry verification (O, N, H, Fe etc. as required).

Packaging & Delivery

  • Unit packs: poly bags/VCI wrap → export plywood cases; ends protected.
  • Labels: grade, size, thread, head, surface, heat/lot, qty, PO.
  • Shipping: global courier or sea freight; lead times aligned with your schedule.

The post Titanium Bolts first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]> Premium titanium bolts for aerospace, medical-equipment and chemical assemblies. Manufactured from Gr2/Gr5/Gr23 under tightly controlled machining and finishing, our bolts deliver dependable strength-to-weight, corrosion resistance and repeatable dimensions for automated lines. Studs and specials are supplied to drawing with full heat/lot traceability and optional documentation (MTC 3.1, test reports).

Technical Specifications

Parameter Details Why It Works for You
Standards DIN 912/931/933/7991, ISO 4762/4014/4017, ASME B18.2/B18.3, JIS; custom per drawing Aligns with common benchmarks; simplifies qualification.
Grades Gr2, Gr5 (Ti-6Al-4V), Gr23 (ELI) Balances corrosion resistance and strength requirements.
Head / Drive Hex cap, socket cap (Allen), button, countersunk/flat, flange; studs; nuts/washers Matches diverse structures and load paths.
Thread Metric M3–M36 (6g/6H); UNC/UNF #4-40–3/4-10 (Class 2A/2B); others on request Covers metric & inch systems for global assembly.
Dimensions Length 6–300 mm typical; specials per drawing From short bolts to long studs.
Condition Machined, stress-relieved; mill-annealed (Gr2/Gr5/Gr23) Stable dimensions and mechanical response.
Surface Pickled / polished / passivated; color anodizing optional; dry-film lubricant on request Corrosion resistance, easy assembly, line identification.
Documentation MTC EN 10204 3.1, inspection reports; RoHS/REACH statements Supports audits and vendor approval.
Traceability Heat/lot ID on labels; part/size/thread/surface recorded Full batch traceability for quality control.

Chemical Composition (Max. Weight %)

Grade N C H Fe O Al V Mo Ni Ti
Gr2 0.03 0.08 0.015 0.30 0.25 — — — — bal
Gr5 0.05 0.08 0.015 0.40 0.20 5.5–6.75 3.5–4.5 — — bal
Gr23 0.03 0.08 0.012 0.25 0.13 5.5–6.5 3.5–4.5 — — bal

Mechanical Properties (Annealed, indicative)

Grade Tensile (MPa, min) Yield (MPa, min) Elongation (%)
Gr2 345 275 20
Gr5 895 828 10
Gr23 860 795 10

Ordering Checklist

  • Standard & head/drive (e.g., DIN 912 socket cap / ISO 4762).
  • Grade (Gr2 / Gr5 / Gr23) & quantities.
  • Size (diameter × length) & thread (M / UNC / UNF; tolerance class).
  • Surface/finish (passivated / polished / anodized; dry-film lubricant if needed).
  • Inspection (dimensional, thread gauge, mechanical sampling, salt-spray if needed).
  • Documentation (MTC 3.1, RoHS/REACH, extra reports).
  • Packaging & labels (unit pack, outer case, label fields).
  • Drawing & notes (chamfers, markings, any special certifications).

 

The post Titanium Bolts first appeared on Trusted Supplier of Refractory Metals & Titanium Solutions.

]]>