– Ultra-thin gauges (0.01–1.00 mm) with tight thickness/flatness control for precision laminations and shielding.
– Clean, oxide-controlled surfaces: bright, matte, pickled or brushed for bonding, coating and welding prep.
– High strength-to-weight and corrosion resistance across Gr1/Gr2/Gr5/Gr7/Gr9/Gr23.
– Flexible supply: slit coils, pancake coils or cut sheets; small-batch prototyping available.
– Batch traceability with mill test certificate (MTC 3.1) and inspection reports on request.
– Chemical processing: corrosion-resistant linings, seals, gaskets and bellows.
– Medical and laboratory: housings, brackets and R&D components (non-implant uses).
– Aerospace and electronics: lightweight shielding, EMI/RFI barriers and precision shims.
– Visual and surface roughness checks; edge and burr inspection.
– Thickness and flatness mapping; width and length tolerances.
– Chemical analysis (O, N, H, Fe etc. as required).
– Mechanical sampling: tensile/yield/elongation appropriate to gauge and grade.
– Coils: vacuum/moisture-barrier wrap with core protection; sheets: interleaved and film-wrapped.
– Export plywood cases with corner and edge guards.
– Labels include grade, temper/condition, thickness × width, lot/heat, coil weight/length, PO.
– Global courier or sea freight; lead times aligned with your build schedule.
Premium titanium foil engineered for chemical, medical-equipment and aerospace uses. Manufactured under controlled rolling and finishing, LuminaTitan foil offers clean surfaces, stable mechanical response and reliable corrosion resistance at very low gauges. Supply options include slit coils, pancake coils or cut-to-size sheets with full lot traceability.
| Parameter | Details | Why It Works for You |
| Standards | ASTM B265 (titanium strip/sheet/plate), ASTM F67 (CP Ti, optional) | Aligns with widely used material frameworks. |
| Grades | Gr1, Gr2, Gr3, Gr4, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr23 (ELI) | Choose balance of formability, strength and corrosion resistance. |
| Thickness | 0.01–1.00 mm (others on request) | From ultra-thin laminations to robust shims. |
| Width | 10–1,250 mm typical (slit to width) | Fit your process without secondary trimming. |
| Condition | Cold-rolled/annealed; stress-relieved as required | Stable flatness and predictable forming. |
| Surface | Bright, matte, pickled, brushed | Supports bonding, coating and clean assembly. |
| Edges | Slit, deburred or rounded | Safer handling; improved winding and feeding. |
| Formats | Coils/spools; pancake coils; cut sheets | Flexible supply aligned to your line setup. |
| Tolerances | Thickness ±0.005–±0.02 mm; width ±0.2–±0.5 mm (typical) | Interchangeability and tight stack-up control. |
| Documentation | MTC EN 10204 3.1; inspection reports; RoHS/REACH statements | Supports audits and supplier qualification. |
| Grade | Tensile (MPa, min) | Yield (MPa, min) | Elongation (%) |
| Gr1 | 240 | 138 | 24 |
| Gr2 | 345 | 275 | 20 |
| Gr3 | 450 | 380 | 18 |
| Gr4 | 550 | 483 | 15 |
| Gr5 | 895 | 828 | 10 |
| Gr7 | 345 | 275 | 20 |
| Gr9 | 620 | 438 | 15 |
| Gr23 | 860 | 795 | 10 |
| Grade | N | C | H | Fe | O | Al | V | Mo | Ni | Ti |
| Gr1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | — | — | — | — | bal |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | — | — | — | — | bal |
| Gr4 | 0.05 | 0.08 | 0.015 | 0.40 | 0.40 | — | — | — | — | bal |
| Gr5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5–6.75 | 3.5–4.5 | — | — | bal |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | — | — | 0.12–0.25 | — | bal |
| Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5–3.5 | 2.0–3.0 | — | — | bal |
| Gr23 | 0.03 | 0.08 | 0.012 | 0.25 | 0.13 | 5.5–6.5 | 3.5–4.5 | — | — | bal |
– Standard (ASTM B265) and grade (e.g., Gr2 / Gr5 / Gr23).
– Thickness × width, tolerances, flatness and edge type.
– Condition (cold-rolled/annealed), surface (bright/matte/pickled/brushed).
– Supply form (coil/pancake/sheets) and target coil weight/length.
– Certificates (MTC 3.1) and any special test requirements.
