Titanium Strip

Key Advantages

Precision slit strip in Grades Gr1–Gr5 with consistent thickness and flatness for automated processing.
High strength‑to‑weight and corrosion resistance for chemical, medical and aerospace environments.
Tight tolerances (thickness/width/camber) and clean edges to protect downstream tooling.
Multiple finishes (pickled, brushed, polished) for bonding, coating and clean assembly.
Full batch traceability; MTC EN 10204 3.1 and inspection reports available.

Primary Applications

Chemical processing: corrosion‑resistant liners, gaskets, bellows and heat‑exchanger strips.
Medical devices (non‑implant): shields, housings and precision springs with biocompatible surfaces.
Aerospace: lightweight shims, shields and brackets with low magnetic signature.

Testing (typical)

Dimensional checks: thickness/width tolerance, camber, flatness, edge quality.
NDT / surface: visual and eddy‑current (size‑dependent), roughness measurement.
Chemistry verification: O, N, H, Fe and alloying elements per grade.
Mechanical sampling: tensile, yield and elongation per standard.

Packaging & Delivery

Unit packs: moisture‑barrier wrap on coils or sheeted bundles → export plywood cases.
Labels: grade, size, finish, condition, heat/lot, net weight/length, PO.
Shipping: global courier or sea freight; lead times aligned with your schedule.

Send your specifications (grade, size, quantity) — quotation and lead time within 12 hours. Trial orders with flexible MOQ are supported for evaluation and qualification. All materials are supplied with EN 10204 3.1 MTC and full inspection documentation for export compliance.

Product Description

Premium titanium strips engineered for chemical, medical and aerospace applications. LuminaTitan supplies slit strip manufactured under controlled rolling and finishing, then verified in‑house to deliver a high strength‑to‑weight ratio, corrosion resistance and repeatable mechanical behavior for automated lines and precision assemblies.

Technical Specifications

Parameter	Details	Why It Works for You
Standards	ASTM B265 (strip/sheet/plate), AMS 4911 (Ti sheet/strip), ASTM F67/F136 (CP/ELI where applicable)	Aligns with widely used specifications for design and QA.
Grades	Gr1, Gr2, Gr3, Gr4, Gr5 (Ti‑6Al‑4V), Gr7, Gr9, Gr23 (ELI)	Balances corrosion resistance, strength and formability by use case.
Thickness Range	0.10 – 4.00 mm (others on request)	From thin, flexible strip to robust structural shims.
Width Range	10 – 2500 mm (slit coil or sheeted)	Fits your line width; reduces secondary rework.
Tolerances	Thickness ±0.01–±0.05 mm typical; camber/flatness to drawing	Reliable fit for automated stamping, bending and laser lines.
Condition	Cold‑rolled, annealed or stress‑relieved	Tune ductility/strength for forming or stiffness for service.
Surface	Pickled, brushed, polished; low‑roughness options available	Supports bonding/coating and reduces particulate risk.
Forms	Slit coils, sheeted strip, blanks to drawing	Straight‑to‑line supply saves setup time and scrap.
Documentation	MTC EN 10204 3.1; dimensional and mechanical test reports	Supports audits and vendor qualification.
Traceability	Heat/lot IDs on labels; full batch records retained	End‑to‑end traceability for quality control.

Chemical Composition (Max. Weight %)

Grade	N	C	H	Fe	O	Al	V	Mo	Ni	Ti
Gr1	0.03	0.08	0.015	0.20	0.18	—	—	—	—	bal
Gr2	0.03	0.08	0.015	0.30	0.25	—	—	—	—	bal
Gr4	0.05	0.08	0.015	0.40	0.40	—	—	—	—	bal
Gr5	0.05	0.08	0.015	0.40	0.20	5.5–6.75	3.5–4.5	—	—	bal
Gr7	0.03	0.08	0.015	0.30	0.25	—	—	0.12–0.25	—	bal
Gr9	0.03	0.08	0.015	0.25	0.15	2.5–3.5	2.0–3.0	—	—	bal
Gr12	0.03	0.08	0.015	0.30	0.25	—	—	0.2–0.4	0.6–0.9	bal