Precision customization: thickness 0.01–0.5 mm, width 20–500 mm, custom lengths; grades R60702 / R60704 / R60705; small-batch sampling available.
High corrosion & thermal stability: consistent performance in corrosive media and radiation environments.
Process control & QA: cold-rolled & annealed; visual / chemical / mechanical checks; low impurity control.
Clean surfaces: no burrs, no oil spots—ready for downstream forming, laminating, shielding.
Nuclear: reactor components; resists radiation and corrosive coolants.
Chemical processing: corrosion-resistant liners; withstands acidic/alkaline media.
High-tech devices: precision shields; supports thermal management and structural integrity.
Visual inspection: surface quality, burr-free finish.
Chemical analysis: element control to specification (ASTM).
Mechanical tests: tensile, ductility as ordered/grade-dependent.
Packaging: protective wrap; export wooden cases or custom solutions; edges protected.
Labeling (on request): grade, thickness/width, condition, heat/lot, length/pcs, PO.
Shipping: global courier or sea freight; lead times aligned with your schedule.
High-quality zirconium foil/strip engineered to ASTM B551. Produced by cold rolling and annealing for uniform microstructure, precise thickness control, and clean surfaces. With excellent corrosion resistance and configurable thickness, width, and length, it fits demanding uses in nuclear, chemical, and high-tech industries.
| Parameter | Details | Why It Works for You |
|---|---|---|
| Standards | ASTM B551 | Aligns with global industrial quality for critical applications |
| Grades | R60702, R60704, R60705 | Balance purity, strength, and corrosion resistance |
| Thickness | 0.01–0.5 mm | Covers ultra-thin shielding to robust strip needs |
| Width | 20–500 mm | Fits most coil-to-line and precision cutting setups |
| Length | Customized (sheets or coil) | Matches production lines; reduces waste |
| Processing | Cold-rolled | Tight gauge control and consistent flatness |
| Condition | Annealed | Stable mechanical behavior, good formability |
| Surface | No burrs, no oil spots | Smooth downstream processing; fewer defects |
| Grade | Zr+Hf (%) | Hf (%) | Fe+Cr (%) | Sn (%) | H (%) | N (%) | C (%) | Nb (%) | O (%) |
|---|---|---|---|---|---|---|---|---|---|
| R60702 | 99.2 | 4.5 | 0.20 | — | 0.005 | 0.025 | 0.05 | — | 0.16 |
| R60703 | 98 | 4.5 | — | — | 0.005 | 0.026 | — | — | — |
| R60704 | 97.5 | 4.5 | 0.20–0.40 | 1.0–2.0 | 0.005 | 0.026 | 0.05 | — | 0.18 |
| R60705 | 97.5 | 4.5 | 0.20 | — | 0.005 | 0.026 | 0.05 | 2.0–3.0 | 0.18 |
| R60706 | 95.6 | 4.5 | 0.20 | — | 0.008 | 0.026 | 0.05 | 2.0–3.0 | 0.16 |
Standard & grade: e.g., ASTM B551; R60702/R60704/R60705
Dimensions & tolerance: thickness × width × length; coil or sheets; tolerance targets
Condition & surface: annealed; any special finish/roughness, edge requirements
Testing & QA: chemical/mechanical sampling; additional checks if required
Documentation: MTC EN 10204 3.1; inspection reports; RoHS/REACH (as applicable)
Quantity & packaging: lot size; edge/coil protection; export wooden cases
Logistics & terms: target lead time; Incoterms; destination & preferred carrier
Notes: end-use or environment for recommendations (optional)
